HVAC

Air conditioning refers to the cooling and dehumidification of indoor air for thermal comfort. In a broader sense, the term can refer to any form of cooling, heating, ventilation or disinfection that modifies the condition of air. An air conditioner (often referred to as AC or air con.) is an appliance, system, or mechanism designed to stabilise the air temperature and humidity within an area (used for cooling as well as heating depending on the air properties at a given time), typically using a refrigeration cycle but sometimes using evaporation, most commonly for comfort cooling in most buildings and motor-cars.

The concept of air conditioning is known to have been applied in Ancient Rome, where aqueduct water was circulated through the walls of certain houses to cool them. Similar techniques in medieval Persia involved the use of cisterns and wind towers to cool buildings during the hot season. Modern air conditioning emerged from advances in chemistry during the 19th century, and the first large-scale electrical air conditioning was invented and used in 1902 by Willis Haviland Carrier.

Air conditioning engineers broadly divide air conditioning applications into comfort and process.

Comfort applications aim to provide a building indoor environment that remains relatively constant in a range preferred by humans despite changes in external weather conditions or in internal heat loads.

Air conditioning makes deep plan buildings feasible, for otherwise they'd have to be built narrower or with light wells so that inner spaces receive sufficient outdoor air via natural ventilation. Air conditioning also allows buildings to be taller since wind speed increases significantly with altitude making natural ventilation impractical for very tall buildings. Comfort applications for various building types are quite different and may be categorized as

Low-Rise Residential buildings, including single family houses, duplexes, and small apartment buildings
High-Rise Residential buildings, such as tall dormitories and apartment blocks
Commercial buildings, which are built for commerce, including offices, malls, shopping centers, restaurants, etc.
Institutional buildings, which includes hospitals, governmental, academic, and so on.
Industrial spaces where thermal comfort of workers is desired.

Refrigeration air conditioning equipment usually reduces the humidity of the air processed by the system. The relatively cold (below the dewpoint) evaporator coil condenses water vapor from the processed air, (much like an ice-cold drink will condense water on the outside of a glass), sending the water to a drain and removing water vapor from the cooled space and lowering the relative humidity. Since humans perspire to provide natural cooling by the evaporation of perspiration from the skin, drier air (up to a point) improves the comfort provided. The comfort air conditioner is designed to create a 40% to 60% relative humidity in the occupied space. In food retailing establishments large open chiller cabinets act as highly effective air dehumidifying units.

A specific type of air conditioner that is used only for dehumidifying is called a dehumidifier. A dehumidifier is different from a regular air conditioner in that both the evaporator and condensor coils are placed in the same air path, and the entire unit is placed in the environment that is intended to be conditioned (in this case dehumidified), rather than requiring the condensor coil to be outdoors. Having the condensor coil in the same air path as the evaporator coil produces warm, dehumidified air. The evaporator (cold) coil is placed first in the air path, dehumidifying the air exactly as a regular air conditioner does. The air next passes over the condensor coil re-warming the now dehumidified air. Note that the terms "condensor coil" and "evaporator coil" do not refer to the behavior of water in the air as it passes over each coil; instead they refer to the phases of the refrigeration cycle. Having the condensor coil in the main air path rather than in a separate, outdoor air path (as in a regular air conditioner) results in two consequences-- the output air is warm rather than cold, and the unit is able to be placed anywhere in the environment to be conditioned, without a need to have the condensor outdoors.