THE STAFF IS VERY UNPROFESSIONAL. My father who is legally blind with diabetes went in and asked if he could possibly put in a special order for canolis made with splenda and then the staff started cussing at him and told him to go somewhere else.
I took my 2 German Shepherds in to Pretty Pets Grooming today. When I picked them up they were soft, fluffy, and smelled oh-so-good! A purrfect grooming!I will definetly bring them back again.
Carpet cleaning, for beautification, and removal of stains, dirt, grit, sand, and allergens, is achieved by several methods, both traditional and modern. Clean carpets are recognized by manufacturers as being more visually pleasing, potentially longer-lasting and probably healthier than poorly maintained carpets.[1]
The professional carpet cleaning industry is primarily educated and unofficially governed by The Institute of Inspection, Cleaning, and Restoration Certification (IICRC). It is a nonprofit certifying body for the specialized fabric cleaning industry that sets modern carpet cleaning standards. It accepts five basic professional cleaning methodologies.
Currently, Steam Cleaning (a.k.a. Hot Water Extraction) is the most popular and widely accepted process, the other methods also have their merits. Carpet cleaning chemical manufacturers have spent the last 20 years+ creating new carpet care technologies. Particularly, Encapsulation dry-cleaning and Green based chemicals have been the talk of the carpet cleaning industry for the last few years. Below are the different methods that are available.
Steam cleaning
Steam Cleaning initially involves the application of a detergent based solution. After appropriate dwell time, a pressurized manual or automatic cleaning tool (aka wand) passes over the surface several times to thoroughly rinse out all residue and particulates.
Heavily Soiled areas require the application of pretreatments, preconditioners, or "traffic-lane cleaners", which are detergents or emulsifiers that break the binding of soils to carpet fibers over a short period of time, are commonly sprayed onto carpet prior to the primary use of the dry-cleaning system. One chemical dissolves the greasy films that bind soils and prevent effective soil removal by vacuuming. The solution may add a solvent like d-limonene, petroleum byproducts, glycol ethers, or butyl agents. The amount of time the pretreatment "dwells" in the carpet should be less than 15 minutes, due to the thorough carpet brushing common to these "very low moisture" systems, which provides added agitation to ensure the pretreatment works fully through the carpet.
Though commonly called "Steam Cleaning", no actual steam is involved in the HWE cleaning process, apart from steam that may escape incidentally from hot water. When the cleaning solution comes in contact with the carpet/rug, it is anywhere between 120-250 degrees Fahrenheit, according to the heat available from the cleaning unit. For instance, in a modern truck-mounted carpet cleaning machine, water can be heated to 300+ degrees (F), but after passing through high pressure steel braided hose and several manifolds, the water loses much of its heat.
The typical cleaning method involves a preconditioning of the soiled surface with an alkaline (7 or above on the pH Scale) agent, followed by light agitation with a grooming brush and appropriate dwell time. Next, the surface is passed over several times with a cleaning tool (either manual or automatic) to thoroughly rinse out the preconditioner and, using an acetic acid solution, lower the pH of the fibres to a neutral state. Finally, the surface is dried sufficiently to avoid any possibility of saturation.